• Fire-rated for up to 3 hours with required hose stream test
• Impact safety-rated - meets ANSI Z97.1 and CPSC 16CFR1201 (Cat. I and II)
• Glass ceramic
• Clear and wireless
• Withstands thermal shock
• Premium grade (polished) Firelite surfaces only
• Large sizes available
• May be lightly sandblasted/etched on one side without affecting fire rating
• Passes positive pressure test standards UL 10C, UBC 7-2 and UBC 7-4
• 5-year limited warranty

Note: This product is not a barrier to radiant heat. This product does not meet test standards ASTM E-119 or UL 263. If your jurisdiction requires a "barrier to heat" product, please see Pyrostop.

Listed and labeled by Underwriters Laboratories, Inc.® and Underwriters Laboratories of Canada. File number for labeled fire-rated assemblies is R13377 and WH1-495-0896. Tests performed in accordance with UL 9, UL 10B, UL 10C, ASTM E2074, ASTM E2010, CSFM 43.7, NFPA 80, NFPA 252, NFPA 257, UBC 43.2, UBC 43.4, UBC 7-2, UBC 7-4, CAN4 S-104 and CAN4 S-106. Approved for use in New York City: MEA 290-90-M-6.

Check with frame manufacturer for maximum tested glass sizes and required stop height.

All glass designated on the drawings as fire-rated and impact safety-rated shall be nominal 5/16" (8 mm) thick Premium Grade FireLite Plus supplied by Technical Glass Products.

CSI FORMAT SPECIFICATIONS

For optimal clarity, FireLite Plus consists of two pieces of FireLite Premium Grade (polished) glass ceramic (not available in Standard Grade, or Obscure). Because FireLite samples are made from transparent glass-ceramic, they differ in color from float glass. FireLite appears to have a warmer earth tone when compared to the blue green tint of typical float glass. However, like float glass, FireLite ceramic will not demonstrate a highly perceptible color once installed in a frame. Additionally, FireLite products are manufactured in three distinct surface grades (premium, standard and obscure) that are best reviewed prior to specification. Please contact TGP at 800.426.0279 or sales@fireglass.com to request a sample kit.

Click on the images below for a larger view.

FireLite Plus Premium: The surfaces have been ground and polished eliminating the slight surface distortion found in FireLite Standard Grade. FireLite Plus consists of two pieces of FireLite Premium laminated together. For more information about why FireLite Plus is a premium product, please see our Polished "Premium" Ceramic FAQ.

Designer Series - 20/45/60/90 Minute Fire-Rated Doors & Frames

The Designer Series doors and frames incorporate precise European engineering, providing a sleek, modern alternative to traditional hollow metal frames.

Hardwood Series - 20/45/60 Minute Fire-Rated Doors & Frames

Designed for maximum durability and performance, the Hardwood Series offers an attractive alternative to traditional hollow metal frames. Available with fire ratings from 20 to 60 minutes, this system can incorporate a wide range of fire-rated glazing materials with glass sizes that surpass traditional systems.

Traditional Hollow Metal Steel Frames-Fire-Rated Doors & Frames

TGP glazing can be used in any approved fire-rated door and frame assemblies.

FireLite Plus must be handled with care during transportation, storage, inspection and installation. Store in a dry place.

To maintain aesthetics, it is important to clean the glass during and after construction. For routine cleaning, use a soft, clean, grit-free cloth and a mild soap, detergent, or nonabrasive window cleaning solution.

Rinse immediately with clean water and remove any excess water from the glass surface with a squeegee. Do not allow any metal or hard parts of the cleaning equipment to contact the glass surface.

Failure to comply with these care and cleaning guidelines may result in loss of warranty.

Download a PDF of our Care & Warranty Brochure.

More about FireLite products.