- Available in two surface conditions for clear viewing, premium grade and standard grade
- Fire-rated for up to 3 hours with hose stream test
- Impact safety-rated -- meets ANSI Z97.1 and CPSC 16 CFR1201 (Cat. I and II)
- Glass ceramic with high performance surface-applied approved fire-rated film
- Clear and wireless
- Withstands thermal shock
- Protects from fire on both sides of the glass
- May be lightly sandblasted or etched on one side without affecting fire rating
- Passes positive pressure test standards UL 10C, UBC 7-2 and UBC 7-4
- 3-year limited warranty
Note: This product is not a barrier to radiant heat. This product does not meet test standards ASTM E-119 or UL 263. If your jurisdiction requires a "barrier to heat" product, please see Pyrostop.
Listed and labeled by Underwriters Laboratories, Inc.® and Underwriters Laboratories of Canada. File number for labeled fire-rated assemblies is R13377. Tests performed in accordance with UL 9, UL 10B, UL 10C, ASTM E2074, ASTM E2010, CSFM 43.7, NPFA 80, NFPA 252, NFPA 257, UBC 43.2, UBC 43.4, UBC 7-2, UBC 7-4, CAN4 S-104 and CAN4 S-106. Approved for use in New York City: MEA 290-90-M-6.
| Rating |
Assembly |
Max. Exposed
Area (in2/ft2) |
Max. Width
Of Exposed
Glazing (in) |
Max. Height
Of Exposed
Glazing (in) |
| 20 min. to 60 min. |
Doors (non-temp rise) |
3,204/22.25 |
36 |
89 |
| |
Doors (temp rise) |
100/0.69 |
12 |
33 |
| |
Other than doors |
3,325/23.09 |
95 |
95 |
| |
| 90 min. |
Doors (non-temp rise) |
2,034/14.13 |
36 |
56-1/2" |
| |
Doors (temp rise) |
100/0.69 |
12 |
33 |
| |
Other than doors |
2,627/18.24 |
56-1/2" |
56-1/2" |
| |
| 3 hour |
Doors |
100/0.69 |
12 |
33 |
| |
| Check with frame manufacturer for maximum tested glass sizes and required stop height. |
Note: Individual lite sizes cannot exceed "Max. Exposed Area" shown above.
This information is intended for general reference only. For current listing details, please call Technical Glass Products.
All glass designated on the drawings as fire-rated and impact safety-rated shall be 3/16" (5 mm) thick FireLite NT supplied by Technical Glass Products. The surface condition shall be either: Premium FireLite NT (polished surfaces); Standard FireLite NT (unpolished surfaces); or Obscure FireLite NT (patterned surface).
CSI FORMAT SPECIFICATIONS
Before specifying a surface grade of FireLite NT, you may wish to obtain samples for comparison. Request a sample kit.
| Thickness: |
3/16" (5 mm) overall |
| Weight: |
2.4 lb/ft2 |
| Approx. Visible Transmission: |
88% |
| Approx. Visible Reflection: |
9% |
| Hardness (Vicker's Scale): |
700 |
| Fire Rating: |
20 minutes to 3 hours |
| Impact Safety Rating: |
Meets ANSI Z97.1 and CPSC 16CFR1201 (Cat. I and II) |
Figures are for Premium (polished) FireLite NT. Figures will differ slightly for Standard (unpolished) and Obscure (patterned) surface finishes.
Because FireLite samples are made from transparent glass-ceramic, they differ in color from float glass. FireLite appears to have a warmer earth tone when compared to the blue green tint of typical float glass. However, like float glass, FireLite ceramic will not demonstrate a highly perceptible color once installed in a frame. Additionally, FireLite products are manufactured in three distinct surface grades (premium, standard and obscure) that are best reviewed prior to specification. Please contact TGP at 800.426.0279 or sales@fireglass.com to request a sample kit.
Click on the images below for a larger view.
 |
FireLite Standard:
The surfaces are unpolished and feature a slight surface distortion while maintaining a clear view.
For more information about FireLite surface grades, please see our Polished "Premium" Ceramic FAQ. |
 |
FireLite Premium:
The surfaces have been ground and polished eliminating the slight surface distortion found in FireLite Standard Grade.
For more information about FireLite surface grades, please see our Polished "Premium" Ceramic FAQ. |
 |
FireLite Obscure:
The glass-ceramic features a patterned surface to allow more privacy. |
Designer Series - 20/45/60/90 Minute Fire-Rated Doors & Frames
The Designer Series doors and frames incorporate precise European engineering, providing a sleek, modern alternative to traditional hollow metal frames.
Hardwood Series - 20/45/60 Minute Fire-Rated Doors & Frames
Designed for maximum durability and performance, the Hardwood Series offers an attractive alternative to traditional hollow metal frames. Available with fire ratings from 20 to 60 minutes, this system can incorporate a wide range of fire-rated glazing materials with glass sizes that surpass traditional systems.
Traditional Hollow Metal Steel Frames-Fire-Rated Doors & Frames
TGP glazing can be used in any approved fire-rated door and frame assemblies.
FireLite NT must be handled with care during transportation, storage, inspection and installation. Store in a dry place.
- Care must be taken not to scratch the film.
- Do not use bristle brushes or abrasive cleaning materials.
- Cleaning methods used should be similar to those used on Plexiglas®.
- A soft cloth or clean synthetic sponge is recommended for washing. Do not use the same towel or sponge for wiping sills or frames.
- A squeegee of 70 - 85 durometer hardness is recommended for removal of wash water and dirt from the film.
- Do not apply heavy pressure in any cleaning operation.
- Do not leave the film wet.
- Make sure you use a different sponge, cleaning cloth and water bucket for cleaning the outside and the inside of the windows.
- A little extra detergent for cleaning the film side will make using the squeegee easier.
Failure to comply with these care and cleaning guidelines may result in loss of warranty.
Download a PDF of our Care & Warranty Brochure.
Scotchshield is a registered trademark of 3M.